top of page

 PASTES FOR ELECTROLUMISCENT APPLICATIONS

EIC IN 05

EIC IN 05 is a white thermoset environmental resistant screen printable dielectric paste for low temperature applications. When fully cured the ink has excellent adhesion to ITO This paste has been formulated specifically for use in electro luminescent systems.

Solids Content - 75%
Viscosity - 3.0-6.0 Pas
Curing - 130-150°C

EIC Ag 04

EIC Ag 04 is a high flexibility screen-printable thermoplastic silver paste for low temperature applications. When fully cured the ink has good adhesion to a wide range of substrates including polyester, polycarbonate and glass.

 

Applications: Conductive Tracks & Counter Electrode

Solids Content - 50%
Viscosity - 0.5.-3.0 Pas
Resistivity - 15 mΩ/â–¡ @ 25um
Curing - 80-130°C

EIC PB 02

EIC PB 02 is a heat curable 1K thermoset binder formulated specifically for use in electro luminescent systems. This system has exceptional chemical and environmental resistant and excellent adhesion to ITO.

Solids Content - 42%
Viscosity - 0.5-2.0 Pas
Curing - 130-150°C

EIC IN 04

EIC IN 05 is a pink thermoset environmental resistant screen printable dielectric paste for low temperature applications. When fully cured the ink has excellent adhesion to ITO This paste has been formulated specifically for use in electro luminescent systems.

Solids Content - 75%
Viscosity - 3.0-6.0 Pas
Curing - 130-150°C

EIC PH 24

EIC PH 24 is a screen printable high brightness blue-green phosphor paste. Excellent adhesion to flexible and rigid ITO substrates. Good environmental resistance.

​

​

Application: Electroluminescence 

Solids Content - 80%
Viscosity - 1.5-3.0 Pas
Curing - 130-150°C

EIC PH 44

EIC PH 44 is a screen printable high brightness green phosphor paste. Excellent adhesion to flexible and rigid ITO substrates. Good environmental resistance.

​

​

Application: Electroluminescence 

Solids Content - 80%
Viscosity - 1.5-3.0 Pas
Curing - 130-150°C

EIC PH 64

EIC PH 64 is a screen printable high brightness blue phosphor paste. Excellent adhesion to flexible and rigid ITO substrates. Good environmental resistance.

​

​

Application: Electroluminescence 

Solids Content - 80%
Viscosity - 1.5-3.0 Pas
Curing - 130-150°C

EIC PH 14

EIC PH 14 is a screen printable high brightness orange phosphor paste. Excellent adhesion to flexible and rigid ITO substrates. Good environmental resistance.

​

​

Application: Electroluminescence 

Solids Content - 80%
Viscosity - 1.5-3.0 Pas
Curing - 130-150°C

EIC PH 74

EIC PH 64 is a screen printable high brightness white phosphor paste. Excellent adhesion to flexible and rigid ITO substrates. Good environmental resistance.

​

​

Application: Electroluminescence 

Solids Content - 80%
Viscosity - 1.5-3.0 Pas
Curing - 130-150°C

EIC CR 03

EIC CR 03 is a high conductivity screen-printable thermoplastic paste used in a variety of applications. When fully cured the ink has good adhesion to a wide range of substrates including polyester, polycarbonate and glass.

​

Applications: Batteries, Resistive Heaters, Busbars and Conductive Tracks 

Solids Content - 38-42%

Viscosity - 7.0-9.0 Pas

Resistivity - <3 Ω/â–¡ @ 25um

Curing - 100-140°C

bottom of page